viewpoint switches ================================================================================ S1 1-3 baud rate 000 110 001 150 010 300 011 1200 100 2400 101 4800 110 9600 111 19200 4 auto-scroll 0 disabled 1 enabled 5 auto-linefeed 0 disabled 1 enabled 6 line mode 0 half duplex 1 full duplex 7-8 parity 00 odd 01 even 10 mark 11 space ================================================================================ S2 1 char display 0 light 1 dark 2 display parity 0 disabled 1 enabled 3 screen refresh 0 60 Hz 1 50 Hz 4-6 International character sets 000 Domestic U S 001 Belgium, France 010 Germany, Switzerland 011 Sweden, Finland 100 Denmark, Norway 101 Spain 110 United Kingdom, Netherlands 111 Reserved 7 cursor display 0 steady 1 blinking 8 cursor format 0 block 1 underline ================================================================================ JP1 jumper key click [ enables key click ] ================================================================================ vpt-1a switches Rear Panel Switch Settings -------------------------- Switch Name Setting Function -------------------------------------------------------- 1,2,3 Baud Rate 000 110 001 300 010 1200 011 1800 100 2400 101 4800 110 9600 111 19,200 4 Auto Scroll 0 Disabled 1 Enabled 5 Auto Line Feed 0 Disabled 1 Enabled 6 Line Mode 0 Half Duplex 1 Full Duplex 7,8 Parity 00 Odd 01 Even 10 Marking 11 Spacing 0 = Up, 1 = Down Switches are only polled at power-up, so if any settings are changed with the terminal ON, it must be powered-up again for functions to be altered. --- vpt-2 switches --- vpt-3a+ switches REAR PANEL SWITCH SETTINGS Switch # Name Setting Function S1-1,2,3 Data Rate 000 110 (bps) 001 300 010 1200 011 1800 100 2400 101 4800 110 9600 111 19200 S1-4 Auto Scroll 0 Disabled 1 Enabled S1-5 Auto Line Feed 0 Disabled 1 Enabled S1-6 Line Mode 0 Half Duplex 1 Full Duplex S1-7,8 Parity 00 Odd 01 Even 10 Marking 11 Spacing INTERNAL SWITCH SETTINGS S2-1 Character 0 Light on dark Display 1 Dark on light S2-2 Parity Error 0 Disabled 1 Enabled S2-3 Screen Refresh 0 60 Hz 1 50 Hz S2-4 Mode 0 3A Mode 1 3A Plus Mode S2-5 Clear Screen 0 Enabled (CTRL-Z) 1 Disabled S2-6 Space/Adv 0 Disabled 1 Enabled (not used in 3A+ mode) S2-7 Cursor 0 Steady 1 Blinking S2-8 Cursor 0 Block 1 Underline COMMANDS ASCII CODE Address, Absolute ESC,=,row,column Beep BEL Aux Port Enable ESC,@ Aux Port Disable ESC,A Backspace BS Cursor back BS Cursor down LF Cursor forward FF Cursor home RS Cursor up VT Cursor supress ETB Cursor enable CAN Erase to end of line ESC,T Erase to end of page ESC,Y Erase screen SUB Keyboard lock SI Keyboard unlock SO Read current cursor position ESC,? Set Attribute ESC,0,x (see below for values of x) Tag bit reset ESC,( Tag bit set ESC,) Transparent Print on ESC,3 Transparent Print off ESC,4 ATTRIBUTES Normal @ Half Intensity A Blinking B Half Intensity Blinking C Reverse Video P Reverse Video Half Intensity Q Reverse Video Blinking R Reverse Video Half Intensity Blinking S Underlined ` Underlined Half Intensity a Underlined Blinking b Underlined Half Intensity Blinking c Video suppress D Jay's termcap for the thing: p0|plus|Adds Viewpoint 3a+:\ :am:bw:bs:pt:co#80:li#24:\ :cd=80\EY:ce=\ET:cl=80\E*:cm=\E=%+ %+ :\ :up=^K:ho=^^:kb=\b:nd=\f:so=\E0Q\E):se=\E(:\ :kd=^J:kh=^^:kl=\b:kr=^L:ku=^K: